| |
|
Some of the documents on this page are
in Adobe Acrobat PDF format for high quality print characteristics.
If you do not have the free Acrobat Reader plugin, you may download
it here.
|
|
|
|
|
|
C-730 Selective Flux Dispensing System
 Asymtek’s
Century® Flux dispensing system provides automated, precise application
of traditional and no-clean solder fluxes for a wide range of advanced
semiconductor and board assembly processes that include flip
chip underfill and chip
scale package. This innovative system replaces the high-maintenance
dipping operation often performed within precision component placement
equipment, maximizing production speed and increasing machine utilization
by as much as 30 percent.
Using a dedicated fluxing system also eliminates contamination
of the flux itself. The fully enclosed and vented Century Flux system
delivers a continuous supply of fresh material to ensure repeatable
application of flux with consistent film thicknesses.
The C-730 uses the DJ-2200 DispenseJet® valve
to provide 100-percent coverage of the flux area with thin film
builds as low as 5 µm (0.2 mils). The combination of low film
builds and excellent edge definition minimizes flux residue, enhances
part reliability, and reduces or eliminates cleaning.
To enhance overall production integration, the Century Flux dispensing
system is equipped with conveyors and supports industry-standard
SMEMA-compliant interfaces. Asymtek designed the system to integrate
equally well into both advanced semiconductor packaging and SMT
lines. It is ergonomically designed and has a compact 914 x 1041
mm (36 x 41 in.) footprint. Safety interlocks and an emergency stop
are standard.
The Century Flux system’s 3-axis motion control system, precision
fluid control, and vacuum purge station ensure a high degree of
accuracy throughout the dispensing cycle. Our Fluidmove® for Windows XP® software and
teach camera facilitate quick and efficient programming within a
familiar Windows XP environment. The FmXP software allows different
flux thickness settings per die and bump size.
Features
- Cost-effective selective flux dispensing
system replaces dipping, maximizing machine utilization and increasing
yields
- With easy-to-use FmXP software, flux thickness
can be modified to accommodate different die and bump sizes per
board
- The Century Flux system’s closed fluid
system requires minimal maintenance for maximum uptime
Brochure
| If you're planning to install an Asymtek
piece of equipment, please check with your Asymtek representative
for the exact dimensions. The dimensions shown in the following
brochures are subject to change between publication dates.
|
back to top
|
|
|
